Conflict eGeoffrey with hotspot on Raspi

[eporocrail]

@user2684

I managed to get the raspi up and running as hotspot.
I used:

[https://raspberryconnect.com/projects/65-raspberrypi-hotspot-accesspoints/183-raspberry-pi-automatic-hotspot-and-static-hotspot-installer](link url)

Installation of eGeoffrey also OK. After upload of a back-up the hotspot was gone. No adapter found. dhcpd not running.

eGeoffrey did not configure its stuff also.

[eporocrail]

@user2684

Just the hotspot with eGeoffrey is working OK. Performance of the web browser is OK with 164 Mib allocated to the GPu.

Do not back-up from a different system. Just start from scratch.

At this point it seems feasible to have a stand-alone system based on a raspi only and sensor modules using a mesh network and MQTT.

[user2684]

@eporocrail said in Conflict eGeoffrey with hotspot on Raspi:

Do not back-up from a different system. Just start from scratch.

Shouldn't be the case...wonder if there is already an eGeoffrey running after installation while you try to start the one you have just restored...